Why Won't My Drone Fly

You’ve got your drone, and you know how to fly it. But when you press the “go” button, the quadcopter just hovers in place.

Why won’t my drone fly? Well, there could be a number of reasons why this is happening. For starters, is that even your drone? Did you buy from a reputable dealer? Did it come with instructions on how to use it safely?

Did you read those instructions before flying? If not then those are all things that could have led to an unsuccessful flight when pressing the “go” button didn’t work out as planned!

Jump Through The Article

step By Step Instructions To Fix Drone

Flying drones is fun and exciting, but sometimes things go wrong. Whether it’s because of a software glitch, hardware failure or user error, here are some steps on how to troubleshoot and fix a drone that won’t fly.

step 1: Safety First

Before you begin, make sure the drone is powered off. The last thing you want to do is accidentally fly it into the ceiling or onto someone’s head. Also, make sure your drone is in a safe place where it won’t be disturbed or damaged.

Avoid fly zones such as near people and buildings, power lines, trees and other large objects that could potentially knock your drone out of commission if impacted by one of these obstacles.

step 2: Diagnose The Problem

To diagnose the problem, you first need to make sure that the drone is on. If it’s not, press and hold down the power button for 5 seconds until it beeps.

Next, check that the battery is charged by plugging it into a charger for 30 minutes or more. You should see lights come on as soon as you connect your charger to a wall outlet or power strip (don’t wait until after you’ve plugged in your drone). If they don’t, try charging with another charger or wall outlet.

If neither of these steps fixed your issue and you still can’t get your drone off the ground, move on to step 3!

step 3: Update Firmware

To update the firmware, you will need to download it from the manufacturer’s website. Once you have downloaded it, save it to your computer.

Next, connect your drone to your computer using a Micro USB cable (the same one that came with the unit). If this is not possible as it may be missing or broken, contact customer service immediately and they should send you one free of charge! They’re very nice!

Open up the updater on your computer and follow on-screen instructions to update firmware. This process can take anywhere between minutes or hours depending on how large an update file is being installed—so be patient while waiting for completion!

Once finished updating firmware, disconnect drone from computer before proceeding with next step in troubleshooting process:

step 4: Check Propellers

Once you have checked that all the important parts are intact, it’s time to check the propellers. The first thing to look at is whether they are the right size for your drone.

If one of them seems too large or too small, you’ll need to replace it with one that is more appropriate for your particular model.

Next, make sure that each propeller is balanced and in good condition (no cracks or dents). It’s also important that none of them are loose because this can cause problems later on during flight.

step 5: Test The Drone

To test your drone, you should first make sure that all of the conditions are correct. You should be able to fly in a location where there is no wind, no people, and no obstacles.

This can be tricky if you live in an area where the weather is unpredictable or has many trees or buildings. If this is the case for you then consider testing your drone indoors on a rainy day when there is no wind.

The best way to test your drone would be outside with absolutely nothing around it except for maybe some trees in the distance so that there are no obstructions nearby that could affect its flight performance negatively by getting hit by any branches from those trees!

step 6: Check Compass Calibration

The drone’s compass needs to be calibrated if the front of your drone is pointing north and you’re still pointing in an east or west direction. To fix this, follow these steps:

Power on your controller and wait for a solid green light beside “ON” to appear (this will take about 15 seconds).
Use your controller’s joystick to move the left stick forward until it reaches full throttle position. This will make sure that both LEDs turn on. If they don’t, go back to step one where we check our batteries again before proceeding with calibration.
Now move each waypoint using up/down right/left joystick buttons until true north is aligned with center axis of drone’s yaw motor (blue LED should be constantly illuminated).

step 7: Check Gps Signal

GPS signal is important for navigation, so if your drone’s GPS signal is weak or lost, it might not be able to fly properly.

You can check the strength of your drone’s GPS signal by looking at its antennas: if they’re bent or damaged, this could mean that there isn’t enough signal coming from them to keep it flying properly.

Some drones have a dedicated antenna for receiving GPS signals; if yours does not have one, then you may need to replace the antennas on your drone.

However, it’s important not just whether there is enough signal but also where in relation to other electronic devices (like cell phones) the signals are being blocked or interfered with.

reasons Of Drone Not Flying

Drones are the coolest toys and flying robots in the world. They are used for several purposes like photography, videos, or just fun and leisure. Most of us want to buy a drone but don’t know how to operate them. Here we will discuss some reasons why your drone won’t fly:

defective Battery

If your drone is not flying, it could be due to the battery. There are some things you need to check in order to identify if there’s an issue with the battery:

Check the voltage of the battery. The voltage level should be between 13.5 V and 14.8 V when fully charged. If it’s lower than 13 volts, then you may want to consider replacing or recharging it.
Check that the battery is not damaged or has internal issues (e.g., a bad cell). Do this by measuring its resistance using a multimeter and make sure that it doesn’t exceed 0 ohms or drop below 20 ohms when under load (you’ll need some kind of load tester in order do this properly).

the Drone Is Out Of Range

If you notice that your drone is flying in circles, it could be a few things. The first thing to check is whether the drone is too far away from the controller.

If your drone isn’t responding properly because of a bad connection between the transmitter and the receiver (the small black box on top of the drone), then bring it closer to your remote control or try using another extension cable.

If this doesn’t work, try moving closer to other sources of interference like electrical lines or buildings.

empty Or Low Battery

If your drone is not flying, there could be several reasons for this. The first thing to check would be the battery level. If the battery is at 0%, it will not start. You have to plug in a charging cable into your drone and power supply and wait until it reaches 100%.

If you are using an intelligent flight controller (iFlight), like Pixhawk or NAZA 4/6, then it will automatically stop when reaching 0% power reserve to protect itself from overheating during the charging process. In such case, you should wait until reaching 100% before taking off again.

crashed Or Damaged Drone

If your drone has crashed and is not working, there are a few things to check before trying to repair it. First, make sure that the battery is charged up and that you’re using the correct charger.

If the drone still won’t power up after charging, then there may be something wrong with either its motor or flight controller. In this case, you should take your crashed drone into a store for repairs or replacement.

If your crashed drone is not damaged beyond repair (you can tell because it still powers on), then the most likely problem is that its battery has died from being discharged too much over time—a common issue with drones if they aren’t stored properly or used frequently enough.

If this is indeed what’s happened to your crashed drone, then all you need to do is replace its battery; however, keep in mind that some batteries cannot be easily removed from their enclosures without special tools or expertise—so make sure you know where these tools are before attempting any repairs yourself!

flight Controller Error

If your drone is not flying, it’s possible that there is a problem with the flight controller. The flight controller is what tells your drone how to fly and how fast to go, so if something goes wrong with this component then you may be unable to control your drone at all. To check for this issue:

Make sure you’re using an approved charger for your batteries! If you’re using a third party charger or one that came with another device, there’s a chance of malfunctioning.
Check the connections on both ends of each wire on both controllers individually and make sure they are connected securely enough not to fall out while charging or flying
Try removing both batteries from their respective slots (if applicable) and then reinserting them—this will reset all settings within the controller

the Drone Is Not Calibrated Properly

Calibrating a drone is a process that you can do to ensure that your drone is flying properly. You will need to recalibrate your drone if you have recently changed any of the following things:

The controller or transmitter, such as updating firmware or replacing a broken antenna.
The battery pack, including purchasing new batteries or replacing damaged ones with new ones from another manufacturer.
The charger for the battery pack, such as using another brand of charger or using an adapter cable to charge one type of battery with a different kind of charger than was originally intended by its manufacturer (for example, charging LiPo batteries with NiCad chargers).

what Should I Do If My Drone Will Not Fly In A Straight Line?

If you’re having trouble getting your drone to fly in a straight line, there are a few things that you can do.

Check the battery. The first thing to check is whether or not the battery is fully charged. If it isn’t, charge it for an hour and then try again. If your drone won’t fly even after charging, try swapping out the batteries with another set so that you can make sure one particular battery isn’t going bad on you.
Check the compass and GPS signals. The compass tells your drone which direction north is and how high above ground level it is at any given moment in time (or altitude). If this signal becomes corrupted or lost, your drone may have difficulty determining where exactly it should be headed at any given moment when flying through an area with tall buildings or mountains nearby because they will be obstructing both horizontal GPS signals as well as vertical ones.

what Should I Do If The Drone Makes Unusual Sounds When Flying?

If you hear unusual sounds or see the drone making odd movements, it could be a sign of serious damage. If so, you should not fly the quadcopter again until it has been thoroughly inspected by someone with experience repairing drones.

If you’re not sure what’s causing strange noises and behavior, take some time to check for loose or damaged props/motor shafts and batteries. If everything looks fine but continues to make odd sounds, try checking out our Drone Troubleshooting Guide for more ideas on how to fix your problems.

what Should I Do If My Drone Won’t Take Off?

If your drone is not taking off, there are a few things you should check before calling in a repairman.

Charge the battery fully before use. If you have charged the battery fully but it still won’t take off, try removing it from your drone and reinserting it again in order to clear out any debris that might be stuck inside of the charging port. If this doesn’t work, move onto step 2:
Check that all propellers are facing outward on both sides of your drone (the front side has two props and the back side has four). In addition to making sure all props are facing outward, make sure none are missing or damaged—if so, replace them with new ones immediately! If none of these things help solve your problem, move on down to step 3:
*Check if there is any damage on your battery or charger*. This may seem obvious but if you don’t inspect these items first thing when something goes wrong with them then you could end up wasting time troubleshooting other components instead of focusing directly on what needs attention first!

what Should I Do If My Drone Won’t Turn?

If your drone won’t turn, there are a few things that you can check that could be causing the problem.

The first thing to do is check the compass. If you have a compass on the controller, make sure it’s calibrated and pointing in the right direction. This can be done by turning on the controller, waiting for it to initialize completely and then slowly rotating it until both sticks are centered again (if they aren’t already). If there isn’t a built-in compass on your controller, then check your phone or tablet’s GPS as well as any other devices nearby which may interfere with its signal. If your drone has an external GPS module attached to it (such as many racing drones), then make sure this is positioned correctly too!
Next up: throttle control. Does increasing or decreasing power result in increased or decreased thrust? If so, then everything’s fine here—move onto another set of checks below! However if nothing happens when either stick is moved forwards/backwards

what Should I Do If My Drone Is Drifting?

check The Battery Level

If your drone is drifting, it’s likely that your battery is low. To check this, press the button on your transmitter and look at the display screen to see what percentage of power remains in your battery. If it’s under 25%, charge your batteries immediately by connecting them to a USB port or wall charger with a USB cable.

check For Mechanical Damage

If there isn’t any visible damage to the body of your drone, try moving the control sticks on both sides of its remote control device (RC). Move them forward and backward as well as left and right several times in an effort to reconnect any loose connections that could be causing drift problems in flight controls for this particular model of UAV device (unmanned aerial vehicle).

If no such issues are apparent after doing so then proceed onto checking other possibilities listed here below before calling customer service support again!

Frequently Asked Question (why Won’t My Drone Fly)

Is Your Drone Visible To The Controller?

If your drone’s lights are flashing, it’s a good sign that the controller is communicating with it. If not, it could be a problem with either your radio or your drone. If you’re flying an older model of Phantom and have never updated its firmware, try doing so. This may solve the problem if there’s a bug in the old version.

If both lights are on but nothing happens when you start up (or turn off) the controller, then check to make sure that all three devices are communicating with each other: move them around so they don’t get stuck in any one position where they’re unable to transmit data between one another; also try moving them closer together if possible (the sensor range should be about 100 feet).

If none of these steps work for you—or if this has happened before without resolving itself—you can always contact DJI Support for help troubleshooting further!

Does The Drone Have Enough Power?

To find out if your battery is low, check the battery status indicator and level. This is a large LED light on top of the drone that displays how much juice remains in the pack.

If you’re using a camera-equipped drone and it’s recording video or stills, this could be taking some power away from your flight capabilities. You can also check to see if there are any lights indicating that a component of your aircraft is damaged or malfunctioning (such as an ESC).

If you’re still having trouble flying after checking these things, then maybe it’s time for new batteries!

Is The Drone Level With The Surface It’s On?

The first thing to look at when your drone won’t fly is whether it’s level with the surface it’s on. If your device isn’t level, the drone will not be able to take off and you’ll have a hard time controlling it.

If you’re using an indoor flight simulator program such as Drone Pilot Ground School or Drone Simulator Pro, make sure that your simulator game is set up so that you can use a flat surface (like a table) instead of having to lobby around with a controller in hand while trying not to crash into anything.

A good rule of thumb is: if your drone has legs that fold up underneath its body, make sure they’re resting flat on whatever surface you’ve placed them on before attempting takeoff!

Are The Propellers Damaged Or Old?

One of the most common causes of drone problems is a broken propeller. In order to fly, a quadcopter needs four rotors and four propellers. These props are what help your drone stay in the air, so if they’re damaged, it’s likely that your drone will be unable to fly.

Propellers can break if you hit trees or branches on your way down from an especially high flight; if you crash into the ground; or if you accidentally hit something in mid-air like another person’s drone (or even another person).

This doesn’t mean that all drones come with spare parts included — some don’t! But it does mean that if your quadcopter includes extra propellers (and most do), then these extras can come in handy if one breaks during flight.

Is Your Battery Fully Charged?

You should charge the battery fully before you fly and after every flight. If you have a remote-controlled drone, make sure that the transmitter is set to the correct frequency for your model so that it can communicate with your drone.

And lastly, make sure that if you’re using a charger designed specifically for your battery (such as an intelligent charger), it’s set up properly and connected to an outlet or power supply with enough amperage capacity.

conclusion

If you’re new to flying drones, the first thing to know is that the technology behind these machines is still very new. There are lots of things that can go wrong, but if you follow these tips and stay patient with yourself, your drone will be flying in no time!