How To Connect DJI Drone To Phone

When it comes to flying drones, one of the most common issues is connecting your drone to your phone. This can be very frustrating especially if you’re a beginner. We hope you find this tutorial helpful and don’t forget to share this with other DJI owners out there.

How to Connect DJI Drone to Phone? To connect a DJI drone to your phone, you’ll need to download the DJI GO app. Once you do, it should prompt you to connect your drone. If it doesn’t, tap the “Remote Controller” button at the bottom of the screen and follow the prompts to connect.

DJI is known for its drones ranging from small to large. Most of the time, these flying products can do magic in the air on their own. However, you will find that having an app matched with your drone can make all the difference.

In this article, I’ll talk about controlling your DJI drone with a mobile app as well as how to connect DJI drone to phone via Wi-Fi and other connection methods.

Jump Through The Article

How To Connect Dji Drone To Ios Phone (step By Step Instructions)

The easiest way to connect your DJI drone to your iOS device is through Wi-Fi. To do this, you’ll need to be using a compatible iOS device and have the latest version of the DJI GO app installed on it.

The DJI GO 4 app is compatible with iOS devices, which includes iPhone and iPad. The following steps will show you how to connect your drone to your iPhone or iPad.

Follow the steps below to connect your drone:

Step 1. Turn On Your Drone

The first thing you’ll want to do is turn on your drone. Press the power button on the remote control to turn it on. The lights will flash and the drone will vibrate. If this doesn’t happen, it’s possible that your batteries are dead or not installed properly.

Double check that all four batteries are secure in their slots and that they’ve been installed correctly (it’s easy for them to get jostled out of place).

Step 2. Turn On The Remote Controller

The remote controller is the device you use to control your drone’s movements. To turn it on, press the power button for about 2 seconds. The indicator light will flash red and blue, and a voice prompt will say “Remote controller is powering up.”

Step 3. Download And Install Dji Go App

The DJI Go app is a free download on the App Store, and it’s compatible with all of DJI’s drones. You’ll need to have an iPhone or iPad running iOS 11 or later to use it.

Once you’ve downloaded and installed the app, you’ll be prompted to log in using your DJI account credentials. If you don’t have an account yet, you can create one from within the app itself.

Step 4. Connect The Remote Controller To Your Mobile Device

To make sure you can control your DJI drone with your iPhone or iPad, you need to connect the remote controller via Wi-Fi. You’ll also want to make sure that the device is charged so that there are no problems during flight.

To do this, press and hold down the power button until a small light on top of the remote flashes green.

Once it does so, press and hold down on the same button again until all four lights flash blue before releasing them. This will turn on Bluetooth and allow you to connect wirelessly with your mobile device.

Step 5. Connect To The Drone

Once you’ve connected your iOS device to the drone, you can then connect to it using DJI GO 4. If you haven’t installed DJI GO 4 yet, you can do so by going to Settings > General > Software Update > Download & Install.

Launch DJI GO 4 on your phone and tap Settings > Connection Settings. Then select Remote Controller Mode and choose “Remote Controller 2.” Tap OK.

Connect your iOS device using a Lightning cable and wait for it to show up in the app as a remote controller option. Then tap Connect to connect.

How To Connect Dji Drone To Android Phone (step By Step Instructions)

If you want to connect your DJI drone to your Android phone, you will need to install the DJI GO app on your device. You can then connect your phone via Wi-Fi and use it as a screen for controlling the drone.

If you’re looking to connect your DJI drone to an Android phone, you can do so with a few simple steps. The following steps will walk you through how to connect your mobile device and drone in order to get the most out of flying.

Step 1. Prepare Your Drone

Your drone needs to be fully charged, and you should have downloaded the DJI Go app from the Google Play Store. You should also ensure that your phone is connected to a Wi-Fi network with internet access (mobile data can be used in a pinch)

Step 2. Install The Dji Go 4 App

Now that you’ve downloaded the DJI GO 4 app, it’s time to install it. The first thing you’ll need to do is select your device and then click “Download” on the download page.

If you have an Android phone, then this should automatically download the app onto your device. If not, check your phone’s downloads folder (or wherever you downloaded apps) and search for “DJI Go 4” or “DjiGo4.”

Step 3. Connect To The Remote Controller

Now, you need to connect the remote controller to the phone. To do so, simply plug in the USB cable into your Android device and then into the remote controller.

You’ll be prompted on your phone’s screen to choose which connection type you’d like to use: Wi-Fi or Bluetooth. If you’re using a DJI Spark drone, which only supports Wi-Fi connections, choose that option and tap Connect.

Step 4. Connect To Wifi Signal On Android Phone

You should see a list of WiFi networks pop up on your screen. Find the one that says “DJI-XXXXX” (where XXXXX is a series of numbers and letters).

This is most likely going to be called “DJI-(last four digits of serial number)” It will probably have “DJI-XXXXX” written underneath it as well, but don’t worry about that for now, just make sure you’re connecting to the right network!.

Step 5. Turn On The Dji Drone And Start Flying

Congratulations, you have now completed all the necessary steps to connect your DJI drone to your Android phone. Now, it’s time to start flying. To do this, simply turn on the drone, take off its propeller guards, and press ‘Take Off’ or ‘Take Off’ on your controller.

Pairing Dji Drone To The Controller

Pairing a DJI drone to the controller is a simple process that all users should know.

Turn on your drone and your controller.
Hold the power button on your controller until the lights start flashing, then release. If you do not see any lights flash, this means that your controller is not in pairing mode and you will need to restart the pairing process.
Press and hold the power button on your remote controller until it starts blinking red and white. When it does, release the button. This means that your remote controller is now in pairing mode!
Now that both devices are in pairing mode, they will automatically connect together when they are within range of each other (about 30 meters). You should see both devices blink red and white at once once they have completed pairing successfully!

Troubleshooting Problems While Connecting Dji Drone To Phone

DJI drones are a fun way to capture and share the world from a unique perspective. To get started, you’ll need to pair your drone with your phone or tablet. The following tips will help you troubleshoot common problems while connecting DJI drone to phone.

Check The Connection Status Of Your Remote Controller

When connecting your DJI drone to your phone, you may encounter some issues. If you are having difficulty connecting, check the status of your remote controller.

If the connection indicator is flashing red and orange, the remote controller is too far away from your phone or it is not in range. You can try moving closer or moving to another location that has fewer obstacles between them.

If the connection indicator is off, try restarting both devices. If they still do not connect, then there may be a problem with either device or with their settings.

Ensure That Your Ios Version Is At Least 10.0 Or Android 8.0

If you are having problems connecting your DJI drone to your phone, it may be because your operating system is older than what is required by DJI Go 4.0.

Currently, the minimum required IOS version is 10.0, and Android 8.0 is required to run DJI Go 4.0.

Ensure Your Phone Has A Strong Wi-fi Connection

When you’re trying to connect your DJI drone to your phone, one thing you should do is make sure that your phone has a strong Wi-Fi connection. If the connection is weak or unreliable, it will be difficult for your drone to send data back and forth between its onboard computer and your phone.

Try To Uninstall And Re-install The Dji App

If you’re having trouble connecting your DJI drone to your smartphone, try uninstalling and reinstalling the DJI GO app. This can help fix a number of connection-related problems, including those that may be caused by an outdated version of the app or an incompatible device.

Close All Other Running Apps

Try closing all other running apps. Many apps use Bluetooth to connect to devices, and if you have multiple apps running at once they may be interfering with your drone’s ability to do so.

Update The Drone Firmware And Dji Go 4 App To The Latest Versions

If the drone won’t connect to your phone, the last thing you can do is to update the drone firmware and DJI GO 4 app to the latest versions.

You can do this by going into the Settings menu on your mobile device and scrolling down to “About.” This will show you what version of Android/iOS you’re running.

If you’re still having trouble after updating, try restarting your phone and then re-connecting your drone. If that doesn’t work, try turning off WiFi on both devices and then reconnecting again.

Conclusion

To connect your phone to your drone, you’ll need to download the app from either the App Store or Google Play and follow the instructions. Once you’re connected via Wi-Fi, the app will take over from there and guide you through pairing with your device.

The steps above show you how to hook your DJI drone up to your phone. Make sure you choose a compatible connection for the type of smart device you are using.

You will not be able to connect in such a manner if you are using an Apple product with a WIFI-only connection. If you need the full features of your phone, including internet, then make sure you have connected correctly so you can get on the go.

Frequently Asked Questions (how To Connect Dji Drone To Phone)

How Do I Connect My Drone To My Phone?

To connect your drone to your phone, you’ll need to download the DJI GO 4 app. Once you have downloaded the app, open it and select “Connected Device.” Select your drone from a list of devices connected to your phone, and follow the prompts on your screen.

Why Is My Dji Drone Not Connecting To My Phone?

Most DJI drones have a connection range of about 300 feet, so if you’re farther than that from your drone, it won’t connect to your phone. You can also check to see if the battery on your drone is low, and make sure that there’s nothing blocking its signal.

How Do I Connect My Dji Mavic Mini Drone To My Phone?

To connect your DJI Mavic mini drone to your phone using the DJI GO 4 app, you’ll need to make sure that both devices are fully charged and then connect them to the same WiFi network. Once that’s done, open up the app on your phone and follow the instructions.

How Do I Connect My Phone To My Mavic Drone?

You can connect your phone to your Mavic drone in a few different ways. The easiest way is to use the DJI GO 4 app, which you can download for free on iOS or Android. If you don’t have the app, you can connect using Wi-Fi or USB.